Skip to main content

Gateway Requirements for Genea Application

This article provides the operating system, software, and hardware requirements for the gateway used by the Genea Application, ensuring correct installation, compatibility, and optimal performance.

Ankita Chakraborty avatar
Written by Ankita Chakraborty
Updated over a month ago

Application

Application category

Required Gateway OS

Additional Software & Installation Notes

Assa Abloy IP Locks

Locks

🪟Windows

  • ScreenConnect ( Preferred )

  • DSR

    • Must be installed directly on the gateway

    • The DSR application must run continuously for the integration to function properly

Tanlock

Locks

🐧Linux

ScreenConnect ( Preferred )

BOSCH Intrusion System

Intrusion

🐧Linux

  • ScreenConnect ( Preferred )

  • Bosch RPS is required for initial setup.

    • To be installed on a local laptop by the Ops team/integrator during commissioning.

    • A backup configuration file can be saved post-setup.

    • RPS does not need to run continuously for normal operation.

Mitsubishi DD

Elevator Destination Dispatch

🪟Windows

Kone DD

Elevator Destination Dispatch

🐧Linux

Schindler Port

Elevator Destination Dispatch

🐧Linux

Recommended Gateway for Genea Direct Integration

For Direct Integration with the Genea Application, we recommend using the Dell OptiPlex Micro Form Factor 7020 or a similar device that meets the specifications below.

Gateway Details:

Recommended Specifications

Device Name: Dell OptiPlex Micro Form Factor 7020

Operating System:

  • Supported: Ubuntu Linux 22.04 LTS (64-bit), Windows 11 Home, Windows 11 Pro

  • Note: If the gateway does not come with Ubuntu, Ubuntu 24.04.2 LTS can be installed manually. For any assistance, please contact Genea Support.

Processor:

  • Intel® Core™ i3-14100T (8 virtual cores, 64-bit)

Memory (RAM):

  • Minimum: 8 GB DDR5 (SODIMM, Non-ECC)

  • Supported Speeds: 4800 MT/s, 5600 MT/s

  • Slots: 2 SODIMM (dual channel)

  • Maximum Capacity: 64 GB (2 x 32 GB)

Storage (SSD):

  • Minimum: 256 GB

  • Slots: 2 x M.2 (NVMe, PCIe Gen4)

  • Supported Sizes: Up to 2 TB per slot (total 4 TB with RAID option)

  • Supported Form Factors: M.2 2230 and 2280

Network Card (NIC) Requirements:

  • 2 NICs required

  • If only one NIC is available, a USB-to-LAN adapter will be needed

Did this answer your question?